The unit has potential free relay (10A, 230 V) that can be switched on and off through the GSM network and works with different other units such as radiators, pumps, etc. The alarm can be set with a delay, between 1 second and 99 hours. Alarms can also be activated automatically with the function Auto Relay.

The unit contains a backup battery. The purpose with this is that the unit will still be able to alarm if the power disappears. The alarm can be set to up to a 40 min delay. If the power is restored within the given time, the alarm will not be triggered. When the power is restored a SMS will be sent from the unit.

The unit has an internal temperature sensor. An external can also be connected. This is an extra accessory and is not included. At request the unit will report the temperature.

The unit can be set to alarm if the temperature goes below or above a set degree. This can be combined with the Auto relay function so that the relay will turn on or off if the unit alarms.

The unit can be used as a thermostat if a radiator is connected to the 230 V socket. 

The unit has two wired alarms. These can be set to alarm at a closing (Normally Open, NO) or a breaking (Normally Closed, NC) function. It is possible to connect different alarms such as fire alarms, motion detectors, liquid level switch, etc.

A special function called Garage opener activates the relay for one second if the calling number matches any of the numbers that has been programmed into the user list for the garage opener.

The unit has an overheating protection. If the unit becomes hotter than 70 degrees Celsius the relay will deactivate and you will receive a message. Increases the security if contact resistance should occur.

The unit communicates wireless with the accessory Ontech Relay 9015 (an extra relay with alarm inputs and temperature sensor). Up to seven accessory units can be connected and controlled individually.